Accessories

The Ranger storage case is used when transporting or storing the Ranger camera system. This ruggedized Pelican case has custom cut foam to securely store all components of the Ranger series system including, camera, solar panel, mounting brackets, hardware, charger, and extension wire. This storage case is designed with extra thick plastic walls, two double throw latches, stainless steel padlock ports, O-ring seal, and an automatic pressure equalization valve for air travel. This 18 in. x 20 in. x 8 in. case can withstand a fall from over 10 ft. and safely protect all components inside the foam-encased system.

Price: $300

The Marine storage case is used when transporting or storing the boat security camera system. This ruggedized Pelican case has custom cut foam to securely store all components of the Marine series system including, camera, and mounting bracket. This storage case is designed with extra thick plastic walls, two double throw latches, stainless steel padlock ports, O-ring seal, and an automatic pressure equalization valve for air travel. This 10 in. x 10 in. x 5in. case can withstand a fall from over 10 ft. and safely protect all components inside the foam-encased system.

Price: $150

The Barrel Mounting Pole is an accessory to be used with the Ranger Solar or Ranger 110V camera series. This pole system is designed to be installed in locations where temporary security or surveillance is required. The Barrel Mounting pole systems weighs 25 lbs when empty and when filled with 50 gallons of water it weighs nearly 500 lbs and can withstand hurricane III force winds. The system is comprised of three 2-3/8 in. galvanized poles that are joined with a 3/8 in. stainless steel bolts. The mounting plates are designed to accept the standard mounting brackets that acompany the Ranger series cameras. Four Phillips head screws securley join the mounting brackets to the steel plates that are welded to the galvanized poles. The galvanized poles are painted white to protect the poles from oxidation. Once the two sections are installed, the final height of the pole system is 12 ft. that is optimum for maximum motion detection performance. When the Barrel Mounting Pole systems requires a location change, all that needs to be done is remove the two sections of poles and empty the water through the spigot located at the bottom of the barrel.

Price: $325

The Modular Mounting Pole is an accessory to be used with the Ranger Solar or Ranger 110V camera series. This pole system is designed to be installed in permanent or semi-permanent locations. The Modular Mounting Pole is comprised of two 2-3/8 in. galvanized poles that are joined with a 3/8 in. stainless steel bolt. The mounting plates are designed to accept the standard mounting brackets that acompany the Ranger series cameras. Four Phillips head screws securley join the mounting brackets to the steel plates that are welded to the galvanized poles. The galvanized poles are painted white to protect the poles from oxidation. The base section of the Modular Mounting Pole system is designed with a basket to keep the system secure in the ground. This base section requires an 18 in. hole to be dug in the desired location for the Ranger camera system. Once the two sections are installed, the final height of the pole is 12 ft. – 6 in. that is optimum for maximum motion detection performance.

Price: $225

The fifty foot extention wire is used with the Ranger Solar camera system when the solar panel needs to be located further away from the Ranger camera for adequate sun exposure. These extension wires can be coupled together to create a maximum distance of 115 ft. (solar panel includes 15 ft. wire). The extension wire is designed with the same connectors that the Ranger camera and Solar Panel have so that extending the distance is as easy as inserting the terminals into the ends of the existing wires. The insulating jacket around the power wires is resistant to animals that attempt to chew on the extension wire and can be placed on the ground without any environmental hazards that would harm the integrity.

Price: $65